1.型材強度、硬度高，消耗的功率增大，導熱系數和熱容小，散熱能力降低。
1., the strength and hardness of the profile are high, the power consumption is increased, the thermal conductivity and heat capacity are small, and the heat dissipation capacity is reduced.
2.雙頭切割鋸的切削速度影響，切削速度增加，消耗的功率增加70%-80%。工進吃刀量增加，切削功率成倍增加，但切削鋸片熱量也成倍增加。
The cutting speed of 2. double head cutting saw has the greatest impact, the cutting speed increases, and the power consumption increases by 70%-80%. Increase the depth of cut feed, cutting power increases exponentially, but the cutting blade heat also increases exponentially.
顯然，從切削溫度的角度出發，既要提高生產量，又使切削溫度不過于升高，所以，選擇切削用量的原則是：大的背吃刀量，較大的進給量，小的進給速度。

Obviously, starting from the angle of the cutting temperature, it is necessary to improve the production capacity, and the cutting temperature is increased, so the choice of cutting principle is: the depth of a large amount of feed, larger volume, lower feed rate.

3.刀具參數前角增加，變形和摩擦減小，切削功率降低，產生的熱量減小，切削溫度下降，當前角再增大，由于契角減少，散熱體積減小，切削穩定升高。竹片叫增大，切削刃工作長度減少，散熱面積減小，切削穩定升高。
3., the cutting tool's parameters increased, the deformation and friction decreased, the cutting power decreased, the heat generated decreased, the cutting temperature decreased, the current angle increased, and the heat dissipation volume decreased and the cutting stability increased. The bamboo chips are called increase, the cutting edge work length is reduced, the heat dissipation area is reduced, and the cutting stability is increased.
4 其他因素，使用切削液可帶走熱量，減小刀具磨損，防止切削刃變鈍，導致變形和摩擦增大，使切削溫度升高。
4 other factors, cutting fluid can take heat away, reduce tool wear, prevent cutting edge blunt, cause deformation and friction increase, and raise cutting temperature.
本文的精彩內容由鋁切割設備進行編寫，本公司堅持以誠信合作的共贏理念，為您提供完善的服務，歡迎點擊進入：http://hnyfqpj.cn/。
The excellent content of this paper is written by aluminum cutting equipment. Our company adheres to the idea of win-win cooperation with sincerity and cooperation, and provides you with perfect service. Welcome to click in: http://hnyfqpj.cn/.