立式中空玻璃生產線的故障其時是很少的，我們?cè)谂袛嚯娕c氣路方面的故障時先采用手動方式進行檢查，再根據實際發生情況來解決問題。
The failure of vertical hollow glass production line is very small at the moment. When we judge the faults in the electric and gas path, we first use manual way to check it, and then solve the problem according to the actual situation.
a.故障：板壓進入塊玻璃后，側定位沒有起來，玻璃出來一部分后在板壓內停止。板壓不壓合。 原因：板壓計數開關未計上數。
A. failure: after the plate pressure enters the first glass, the side position does not rise, and the glass stops in the plate pressure. The plate pressure is not pressed and closed. Reason: the board pressure count switch is not counted.
b.故障：板壓進入塊玻璃后，側定位沒有起來，玻璃出來一部分后在板壓內停止。板壓壓合，下定位托起。原因：手動檢查側定位是否起做用。
B. failure: after the plate pressure enters the first glass, the side position does not rise, and the glass stops in the plate pressure. Press and press the plate. Reason: check whether the side position is used manually.
c.故障：板壓進入塊玻璃后，側定位沒有起來，玻璃出來一部分后板壓輸送輪未停止。原因：檢查板壓內檢測開關

C. failure: after the plate pressure enters the first piece of glass, the side position is not up, and a part of the rear plate pressure conveyer wheel is not stopped. Reason: check switch in check plate
d.故障：板壓進入塊玻璃后，壓合完后不回來，未聽到吸盤吸合的聲音。原因：檢查板壓里面的小區域微動開關。
D. failure: after the plate pressure enters the first piece of glass, it does not come back after the pressure is finished, and the sound of the suction cup is not heard. Reason: check the minimum area microswitch in the plate pressure.
e.故障：1800絲杠型生產線在回參過程是到位不停止。原因：絲杠線回參一定要先將板壓張開過板壓減速開關點，再進行回參。檢查在回參過程中回參點與減速點的接近開關是否有信號。
E. fault: the 1800 screw type production line is not stopped in the return process. Reason: the screw thread back parameter must first open the plate pressure to slow down the switch point, and then return the reference. Check whether there is a signal on the close switch of the return point and the deceleration point during the return parameter.
更多的關于移門生產設備的問題或者詳細的內容，請進入我們公司的網站：http://hnyfqpj.cn/網站中會有很多的內容僅供參考。
A sliding door production equipment more questions or details, please enter our website: http://hnyfqpj.cn/ website will have a lot of content is for reference only.