一：作業環境
1: operating environment
1.設備需安裝防護罩，防止因鋸片、碎片飛散造成人身傷害和財產損失。
1. equipment need to install the protective cover, prevent blade, debris caused personal injury and property damage.
2.作業場所應遠離易燃易爆品。
2. the workplaces should stay away from flammable and explosive products.
二：服裝、防護用具
Two: clothing, protective equipment
1.作業者必須佩帶保護眼鏡、工作帽，防止造成人身傷害。
1. operators must wear protective glasses and hat, to prevent harm.
2.作業者必須穿戴整齊工作服和工作鞋才能作業，不能戴手套，且長發要安置于工作帽內，以防發生危險。

2. operators must wear neat clothing and shoes to work, not wearing gloves, and long hair should be placed on the cap, to prevent the occurrence of danger.

三：使用前注意
Three: pre - use attention
1.確認設備是否良好，主軸精度，軸心公差H7。
1. confirm whether the equipment is good, spindle precision, axle center tolerance H7.
2.檢查鋸片有無缺損、脫落、異常磨損、板體有無彎曲、扭曲、裂痕等異常現場。
2. the saw blade had no defects, shedding, abnormal wear and other abnormal sites, such as whether the plate was bent, twisted, and cracked.
3.確認所選鋸片是否合適切削材料，如選擇錯誤，可能造成鋸片破損、發生人身傷害。
3. confirm whether the selected saw blade is suitable for cutting materials, such as the choice of error, may cause damage to the saw blade and personal injury.
四：鋸片的安裝
Four: the installation of the saw blade
1.保證鋸片與法蘭的潔凈。法蘭直徑在鋸片的直徑1/3-1/4之間。
1. ensure the cleanliness of the saw blade and the flange. The diameter of the flange is between the diameter 1/3-1/4 of the saw blade.
2.保證鋸片按正確的回轉方向安裝，回轉不正確會造成鋸片刀頭損壞及人身傷害事故。
2. ensure that the saw blade is installed in the correct direction of rotation, and the improper turning will cause the damage of the blade head and the personal injury accident.
3.保證所選的鋸片中孔與主軸的軸心要一致，無間隙安裝好法蘭盤，擰緊螺母。
3. ensure that the hole in the saw blade is in accordance with the axis of the spindle, and the flange plate is installed in the gap without the gap, and the nut is tightened.
4.作業前，確認前方無人，然后空轉，檢查設備有無振動，檢查鋸片有無橫向擺動和徑向跳動等異?，F(xiàn)象。
Before the 4. operation, no one in front of the front, and then empty, check the equipment has no vibration, check whether the blade has lateral swinging and radial runout and other abnormal phenomena.