一般情況下，使用一年半至兩年后的鋁型材切割機通常會有壓料速度不穩定，進刀無力的情況出現。
Generally speaking, the aluminum profile cutting machine usually has the unstable material pressing speed and the feeble milling condition after a year and a half to two years.
那么接下來，我們對這一情況做一個詳細的解析
Next, we will make a detailed analysis of this situation.
首先，我們知道，鋁型材切割機是靠氣壓在起到動力輸出的，那么首先檢查兩聯件，查看一下壓力表是否能夠達到6公斤的壓力，通常情況下基本這個都沒什么問題。如果發現壓力達不到，那么檢查一下空氣壓縮機的壓力表有沒有達到大于6的壓力。

First of all, we know that the aluminum profile cutting machine is based on the pressure of the power output, then first check the two parts to see if the pressure gauge can reach 6 kilograms of pressure, in general, the basic this is not a problem. If the pressure is not enough, check whether the pressure gauge of the air compressor has reached a pressure greater than 6.

然后在確認壓力沒有問題的情況下在排查油桶里的油位，一般問題基本都出在這里，算是正常損耗，畢竟有2年的時間。加油的時候切忌不可加的太多，一般加到油桶的3/5處（油筒邊上有一根白色的軟管能顯示油位），加的油我這邊極力推薦使用10號油，油質輕而不粘，相比46號的粘稠10號更好的稀釋度。油桶的作用使得氣壓能夠穩定的輸出給氣缸，關鍵就在這里。
Then in the confirmation of the pressure without problems, in the investigation of the oil tank in the oil level, the general problem is basically here, is the normal loss, after all, for 2 years. Do not add too much when refueling, generally added to the 3/5 of the oil barrel (a white hose can show the oil position on the edge of the oil barrel), and the oil added here is highly recommended to use No. 10 oil, the oil is light and not sticky, and the viscosity of No. 10 is better than that of No. 46. The function of the oil drum makes the air pressure output to the cylinder steadily, and the key is here.
檢查一下氣缸，如果氣缸口出現滴油現象應及時更換。
Finally, check the cylinder. If the oil leakage occurs at the cylinder head, it should be replaced in time.
本文由鋁切割設備友情奉獻.更多有關的知識請點擊:http://hnyfqpj.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is dedicated to aluminum cutting equipment. More relevant knowledge, please click: http://hnyfqpj.cn's most sincere attitude. Provide you with the most comprehensive service. More related knowledge will be given to you. Please look forward to it.