1電力方面
1 electric power
電壓380V是一般的斷橋鋁門窗設備的正常的電壓，頻率50Hz，因此，火線和零線之間的連接就需要注意了。火線和零線要連接好，不然可能會引發事故。這個一般來講，大多數的門窗設備廠家通過顏色分辨，火線為黑色或者藍色，零線為紅色。如果火線接反了，只需要將兩根換過來就好了。
The voltage 380V is the normal voltage of the broken bridge aluminum door and window equipment, the frequency is 50Hz, so the connection between the fire line and the zero line needs to be paid attention to. The fire line and the zero line should be connected well, or it may cause an accident. Generally speaking, most door and window equipment manufacturers are distinguished by color, the fire line is black or blue, and the zero line is red. If the fire line is back, just change the two.
2供氣方面
2 gas supply aspects

由于門窗設備的壓料要保證充足的供氣量，這樣就能更好的使用了，這是基礎，來實現氣缸壓緊。正常情況下，門窗設備的供氣量和氣壓都是有固定的參數要求的，即供氣流量要達到0.3，氣壓也要能夠達到8個壓。在有多個門窗設備的情況下，這就需要多準備一些儲氣罐，這個根據現實情況而定。如果氣壓達不到，門窗加工設備的精確度就會進出產生相應的一些影響，相應地加工效果也會發生一些偏離預想的現象。

Due to the pressure of the door and window equipment to ensure adequate supply of gas, this can be better used, this is the foundation to achieve cylinder pressure. Under normal circumstances, air supply and volume and air pressure of doors and windows equipment have fixed parameter requirements, that is, the flow rate of the gas supply should reach 0.3, and the air pressure should also achieve 8 pressures. In the case of more than one door and window equipment, it is necessary to prepare more gas storage tanks, depending on the reality. If the air pressure is not enough, the accuracy of doors and windows processing equipment will go in and out, and some corresponding effects will also happen.
3設備方面
3 equipment aspects
斷橋鋁門窗設備種類很多，每一種設備又會有多種型號，或者多種設備部位不同等等。所以在門窗設備的安裝調試方面，需要協調好各個區域的工作，把握好每一個世界，這樣調試起來就不會出問題了。
There are many kinds of aluminum doors and windows in the broken bridge, and each kind of equipment will have many types, or different parts of the equipment. Therefore, in the installation and commissioning of door and window equipment, we need to coordinate every region's work and grasp every world well so that we will not be able to go wrong after debugging.
以上內容就是鋁切割設備為大家整理的分享，更多的精彩內容請進入：http://hnyfqpj.cn  我們會有專人為您解答，你的支持是對我們工作更好的支持！
The above is the aluminum cutting equipment for you to share, more wonderful content, please enter: http://hnyfqpj.cn, we will have someone to answer for you, your support is better support for our work.